Hospital Beds, Fixed Height
There are 16 products in this product range.
|
 Click to enlarge image
|
VS 100-C-1
Product type: Fixed Height
4-Section/Double Fowler Positions
- Height fixed at 550mm.
- Gas spring-assisted backrest and kneebend positions adjustment.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Headend and footend panels made of tubular steel frame and laminated fibreboard, detachable and interchangable.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base: 1905mm(L) x 915mm(W).
- A stainless steel, double-hooked IV drip pole with receiving sockets in headend corners.
- Optional Accessories
(a) 1 pair of telescopic safety siderails (Model VS 151-B).
(b) 1 piece of B.S. latex mattress with sanitised PVC zip cover (Model VS 105-M-A).
|
|
Click to enlarge image
|
VS 100-C-2
Product type: Fixed Height
2-Section/Single Fowler Position
- Height fixed at 550mm.
- Gas spring-assisted backrest adjustment.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Headend and footend panels made of tubular steel frame with laminated fibreboards, detachable and interchangable.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base: 1905mm(L) x 915mm(W).
- Stainless steel, double-hooked IV drip pole with receiving sockets in headend corners.
- Optional Accessories
(a) 1 pair of telescopic safety siderails (Model VS 151-B).
(b) 1 piece of hospital B.S. latex mattress with sanitised PVC zip cover (Model VS 105-M-A).
|
|
Click to enlarge image
|
VS 101-A
Product type: Fixed Height
Double Fowler Position Hospital Bedstead
- 4-section, double-fowler mattress base.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Headend and footend panels made of tubular steel frame with laminated fibreboards, detachable and interchangable.
- 2 independent cranking mechanisms for backrest adjustment and kneebend adjustment.
- Cranking handles located at footend of bed.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Size of mattress base: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 101-B
Product type: Fixed Height
Double Fowler Position Hospital Bedstead (Steel Head & Leg Frames)
- 4-section, double fowler mattress base.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- 2 independent cranking mechanisms for backrest adjustment and kneebend adjustment.
- Cranking handles located at footend of bed.
- Castors: 4 x 100mm, grey rubber, diagonal 2 with brakes.
- Size of mattress base: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 102-A
Product type: Fixed Height
Single Fowler Position Hospital Bedstead
- 2-section/single fowler mattress base.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Headend and footend panels made of tubular steel frame with laminated fibreboards, detachable and interchangable.
- Mechanical cranking mechanism for backrest adjustment.
- Cranking handle located at footend of bed.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 102-B
Product type: Fixed Height
Single Fowler Position/Hospital Bedstead
- 2-section/single fowler mattress base.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Headend and footend panels made of tubular steel frame with laminated fibreboards, detachable and interchangable.
- Mechanical cranking mechanism for backrest adjustment.
- Cranking handle located at footend of bed.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 103-A
Product type: Fixed Height
Single Fowler Position Hospital Bedstead (Steel Head & Leg Frame)
- 2-section, single fowler mattress base.
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Finishing: Epoxy powder coated.
- Backrest adjustment by cranking mechanism.
- Cranking handle located at footend of bed.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 104-A
Product type: Fixed Height
Standard Flat Top Hospital Bedstead (Steel Head & Leg Frames)
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Detachable tubular steel head and leg frames.
- Finishing: Epoxy powder coated.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
- Castors for all 4 legs: 4 x 75mm grey rubber, diagonal 2 with brakes.
|
|
VS 104-B
Product type: Fixed Height
Standard Flat Top Hospital Bedstead (Steel Head & Leg Frames)
- Frame: Tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Detachable tubular steel head and leg frames.
- Finishing: Epoxy powder coated.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
- Head frame mounted on 2 units of 75mm grey rubber castors.
- Leg frame mounted on non-slip rubber studs.
|
|
Click to enlarge image
|
VS 105-A
Product type: Fixed Height
Standard Hospital Bedstead - Flat Top, Fixed Height - Laminated Panels - Fixed
- Frame: Tubular mild steel.
- Mattress base: 1.2mm thick steel with ventilation holes.
- Head & footend panels: fixed laminated fibreboard panels with tubular steel frame.
- Finishing: epoxy powder coated.
- Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes.
- Mattress base: 1905mm(L) x 915mm(W).
- Height to mattress base: 550mm.
|
|
Click to enlarge image
|
VS 106-A
Product type: Fixed Height
Adult Cot Bed - Flat Top, Fixed Height
- Frame & safety siderails: tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Full length safety siderails with self-locking mechanism.
- Siderails lowered down vertically when not in use.
- Finishing: epoxy powder coated.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base size: 1905mm(L) x 915mm(W).
- Height to mattress base: 610mm.
|
|
Click to enlarge image
|
VS 106-B
Product type: Fixed Height
Adult Cot Bed - Fixed Height - Single Fowler Position
- Frame & safety siderails: tubular mild steel.
- Mattress base: 1.2mm thick steel sheet with ventilation holes.
- Backrest adjustable by cranking mechanism with cranking handle located at footend of bed.
- Full length safety siderails with self-locking mechanism.
- Siderails lowered down vertically when not in use.
- Finishing: epoxy powder coated.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base: 1905mm(L) x 915mm(W).
- Height to mattress base: 610mm.
|
|
Click to enlarge image
|
VS 106-C
Product type: Fixed Height
Adult Cot Bed - Fixed Height - Double Fowler Positions
- Frame and safety siderails: tubular mild steel.
- Mattress base: 1.2mm-thick steel sheet with ventilation holes.
- Backrest and knee bend positions adjustable by cranking mechanism with individual cranking handles located at footend of bed.
- Full length safety siderails with self-locking mechanism.
- Castors: 4 x 100mm grey rubber, diagonal 2 with brakes.
- Mattress base: 1905mm(L) x 915mm(W).
- Height to mattress base: 610mm.
|
|
Click to enlarge image
|
VS 107-A
Product type: Fixed Height
Hospital Child Cot Bed - Flat Top, Fixed Height
- Frame & safety siderails: tubular mild steel.
- Mattress base: 1.2mm thick steel sheet with ventilation holes.
- Full length safety siderails with self-locking mechanism.
- Siderails lowered down vertically when not in use.
- Finishing: epoxy powder coated.
- Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes.
- Mattress base size: 1370mm(L) x 760mm(W).
- Height to mattress base: 600mm.
- c/w 75mm-thick P.U. foam mattress with Calico cover.
|
|
Click to enlarge image
|
VS 107-B
Product type: Fixed Height
Hospital Child Cot Bed - Fixed Height, Flat Top - Tilting
- Frame & safety siderails: tubular mild steel.
- Mattress base: 1.2mm thick steel sheet with perforated ventilation holes (manually adjustable into 3 tilting positions).
- Full length safety siderails, c/w self-locking mechanism.
- Siderails lowered down vertically when not in use.
- Finishing: epoxy powder coated.
- Castors: 4 x 75mm, grey rubber, diagonal 2 with brakes.
- Mattress base size: 1370mm(L) x 760mm(W).
- Height to mattress base: 600mm.
- c/w 75mm-thick P.U. foam mattress with Calico cover.
|
|
Click to enlarge image
|
VS 157-B
Product type: Fixed Height
Canvas Bed For Mobile Blood Donor Sessions - Foldable Legs & Lengthwise
- Tubular steel frame.
- Finishing: epoxy powder coated.
- Heavy duty nylon canvas material for bedtop - blue.
- Size: 1850mm(L) x 750mm(W) x 600mm(H).
|
|
